Blog

The production process and processing flow of aluminum stretching molds are similar, and also require several steps such as mold design, cutting, heat

Aluminum stretching die is a common type of mold that generally requires processing through the following processes

There are many materials to choose for manufacturing aluminum stretching molds, including alloy tool steel, high-speed steel, molybdenum steel

Cold stamping metal processing at room temperature is generally suitable for billets with a thickness of less than 4mm.

Due to the fact that many stamping factories belong to the main factory, the stamping parts market is very imperfect and sound.

Hardware stamping is a process that uses punching machines and molds to deform or fracture stainless steel, iron

It can increase the surface gloss, rust resistance, and corrosion resistance of metal stamping parts, protecting the metal substrate from external env

The installation of molds for hydraulic presses must be carried out under power-off conditions, and it is prohibited to collide with the start button,

Anchor rod tray mold, also known as anchor cable tray mold, mining support plate mold, anchor rod tray stamping mold, etc

The inner diameter of the section of the part formed by deep stretching should be controlled between 5mm-500mm (0.2-16.69in)

The deep drawing process relies on a balance between metal ductility and compressive strength.

Deep stretching technology is widely used in the production process