Repair during mold installation. Before installing the mold, the upper and lower surfaces of the mold should be cleaned to ensure that the stamping machine operation table on the assembly surface of the grinding tool will not shrink or be damaged, and to ensure the parallelism of the left and right installation surfaces of the grinding tool in production. After assembling the grinding tool, open it, clean and scrub all components of the mold, especially the guiding mechanism. Clean the surface of the grinding tool, ensure the quality of the parts, and apply grease to the rolling part of the moistening grinding tool. Inspect all components of the grinding tool, especially safety pins, safety screws, baffles, punching waste channels, and other safety components.
Maintenance during the production process
(1) During the production process, the parts used in the grinding tool should be regularly oiled, including the cutting edge of the pressure ring, arc, and trimming die.
(2) Regularly clean the small hole waste from the edge pressing die holes.
3. Maintenance costs
(1) After the equipment is running, it is necessary to inspect the grinding tools.
(2) Thoroughly clean the grinding tools to ensure the cleanliness of the molds.
(3) Remove waste from the grinding tool to ensure that there is no waste in the waste bin.
(4) Instantly observe the usage and post use condition of the grinding tool.